|
CAS
# 115-86-6 TRIPHENYL PHOSPHATE |
|||
|
Blulux Laboratories Pvt. Ltd |
|
|
|
HAZARD IDENTIFICATION
==============================================================================
Route Of Entry Inds - Inhalation: YES Skin: YES Ingestion: YES
Carcinogenicity Inds - NTP: NO IARC: NO OSHA: NO
Health Hazards Acute And Chronic: ACUTE: HARMFUL IF SWALLOWED, INHALED, OR
ABSORBED THROUGH SKIN. MAY CAUSE EYE & SKIN IRRITATION.
Explanation of Carcinogenicity: NONE SPECIFIED BY MANUFACTURER.
Signs and Symptoms of Overexposure: NONE SPECIFIED BY MANUFACTURER.
Medical Conditions Aggravated by Overexposure: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
FIRST AID
==============================================================================
IN CASE OF CONTACT, IMMEDIATELY WASH SKIN WITH SOAP AND COPIOUS AMOUNTS OF
WATER. IN CASE OF CONTACT, IMMEDIATELY FLUSH EYES WITH COPIOUS AMOUNTS OF WATER
FOR AT LEAST 15 MINUTES. IF INHALED, REMOVE TO FRESH AIR. CALL MD. INGEST: CALL
MD IM MEDIATELY (FP N).
==============================================================================
FIRE FIGHTING MEASURES
==============================================================================
Flash Point Text: 435F,224C
Auto Ignition Temperature Text:
Lower Limits: N/K Upper Limits: N/K
Extinguishing Media: NONCOMBUSTIBLE. USE EXTINGUISHING MEDIA APPROPRIATE TO
SURROUNDING FIRE CONDITIONS.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N). PREVENT CONTACT WITH SKIN AND EYES.
Unusal Fire/Explosion Hazard: EMITS TOXIC FUMES UNDER FIRE CONDITIONS.
==============================================================================
RELEASE MEASURES
==============================================================================
Spill Release Procedures: WEAR NIOSH/MSHA APPROVED SCBA, RUBBER BOOTS AND HEAVY
RUBBER GLOVES. SWEEP UP, PLACE IN A BAG AND HOLD FOR WASTE DISPOSAL. AVOID
RAISING DUST. VENTILATE AREA AND WASH SPILL SITE AFTER MATERIAL PICKUP IS
COMPLETE.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISSOLVE OR MIX THE MATERIAL WITH A COMBUSTIBLE SOLVENT
AND BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN AFTERBURNER AND SCRUBBER.
OBSERVE ALL FEDERAL, STATE & LOCAL LAWS.
==============================================================================
HANDLING AND STORAGE
==============================================================================
DO NOT BREATHE DUST. KEEP CONTAINER CLOSED. STORE IN A COOL DRY PLACE.
==============================================================================
EXPOSURE CONTROLS/PERSONAL PROTECTION
==============================================================================
Respiratory Protection: WEAR APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation: MECHANICAL EXHAUST REQUIRED.
Protective Gloves: CHEMICAL RESISTANT GLOVES.
Eye Protection: CHEMICAL WORKERS GOGGLES (FP N).
Other Equipment: PROTECTIVE CLOTHING, SAFETY SHOWER AND EYE BATH.
Work Hygenic Practices: PROTECTIVE CLOTHING, SAFETY SHOWER AND EYE BATH.
Supplemental Safety & Health: LD50-LC50 MIX: LD50:(ORL,RAT) 3500 MG/KG,
(UNR,RAT) 3500 MG/KG, (ORL,MUS) 1320 MG/KG, (SCU,CAT) 100 MG/KG.
==============================================================================
PHYSICAL AND CHEMICAL PROPERTIES
==============================================================================
Boiling Point:
471F,244C
Melting/Freezing Point:
122F,50C
Decomposition Temp:
N/K
Vapor Pressure: 0.1 @ 150C Vapor Density: N/K
Specific Gravity: N/K
PH: N/K
Viscosity: N/P
Evaporation Rate & Reference: N/K
Solubility in Water: N/K
Appearance and Odor: WHITE FLAKES AND CHIPS.
Percent Volatiles by Volume: N/K
Corrosion Rate: N/K
==============================================================================
STABILITY AND REACTIVITY
==============================================================================
Stability Indicator: N/P
Stability Conditions to Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials to Avoid: OXIDIZING AGENTS.
Hazardous Decomposition Products: TOXIC FUMES OF: CO, CO*2. THERMAL DECOMP MAY
PRODUCE TOXIC FUMES OF PHOSPHORUS OXIDES AND/OR PHOSPHINE.
Hazardous Polymerization Products: N/P
Conditions to Avoid Polymerization: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
TOXICOLOGICAL
==============================================================================
N/P
==============================================================================
ECOLOGICAL
==============================================================================
N/P
==============================================================================
DISPOSAL
==============================================================================
DISSOLVE OR MIX THE MATERIAL WITH A COMBUSTIBLE SOLVENT AND BURN IN A CHEMICAL
INCINERATOR EQUIPPED WITH AN AFTERBURNER AND SCRUBBER. OBSERVE ALL FEDERAL,
STATE & LOCAL LAWS.
==============================================================================
TRANSPORTATION
==============================================================================
N/P
==============================================================================
REGULATORY
==============================================================================
N/P
==============================================================================
OTHER
==============================================================================
|
|
|
Mfgs. & Exporters: Laboratory Reagents, Fine Chemicals, Analytical
Reagents & Dehydrated Culture Media |
|
|
|
|
