|
CAS
# 111-20-6 SEBACIC ACID for SYNTHESIS |
|||
|
Blulux
Laboratories Pvt. Ltd |
|
|
|
HAZARD
IDENTIFICATION
==============================================================================
Route Of Entry Inds - Inhalation: YES Skin: YES Ingestion: YES
Carcinogenicity Inds - NTP: NO IARC: NO OSHA: NO
Health Hazards Acute And Chronic: ACUTE:MAY BE HARMFUL BY INHALATION, INGESTION
OR SKIN ABSORPTION. MAY CAUSE SKIN IRRITATION.
Explanation of Carcinogenicity: NOT RELEVANT
Signs and Symptoms of Overexposure: SEE HEALTH HAZARDS.
Medical Conditions Aggravated by Overexposure: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
FIRST AID
==============================================================================
EYES:CONTAMINATION SHOULD BE TREATED BY IMMEDIATE & PROLONGED IRRIGATION
W/COPIOUS AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. SKIN:IMMEDIATELY WASH
W/SOAP & COPIOUS AMOUNTS OF WATER. WASH CONTAMINATED CLOTHING BEFORE REUSE.
INHAL:REMOVE TO F RESH AIR. IF NOT BREATHING GIVE ARTF RESP. IF BREATHING IS
DIFFICULT, GIVE OXYGEN. INGEST: WASH OUT MOUTH W/WATER PROVIDED PERSON IS CONSCIOUS.
CALL MD.
==============================================================================
FIRE FIGHTING MEASURES
==============================================================================
Flash Point Text: N/K
Auto Ignition Temperature Text:
Lower Limits: N/K Upper Limits: N/K
Extinguishing Media: CARBON DIOXIDE, DRY CHEMICAL POWDER, APPROPRIATE FOAM OR
WATER SPRAY.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusal Fire/Explosion Hazard: THIS MATERIAL, LIKE MOST MATERIALS IN POWDER
FORM, IS CAPABLE OF CREATING A DUST EXPLOSION.
==============================================================================
RELEASE MEASURES
==============================================================================
Spill Release Procedures: WEAR NIOSH/MSHA APPROVED RESPIRATOR, CHEMICAL SAFETY
GOGGLES, RUBBER BOOTS & HEAVY RUBBER GLOVES. SWEEP UP, PLACE IN A BAG &
HOLD FOR WASTE DISPOSAL. AVOID RAISING DUST. VENTILATE AREA & WASH SPILL
SITE AFTER MATERIAL PICKUP IS COMPLETE.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISSOLVE OR MIX MATERIAL W/COMBUSTIBLE SOLVENT &
BURN IN A CHEMICAL INCINERATOR EQUIPPED W/AFTERBURNER & SCRUBBER. OBSERVE
ALL FEDERAL, STATE & LOCAL ENVIRONMENTAL REGULATIONS.
==============================================================================
HANDLING AND STORAGE
==============================================================================
AVOID CONTACT & INHALATION. KEEP CONTAINER CLOSED. STORE IN A COOL, DRY
PLACE.
==============================================================================
EXPOSURE CONTROLS/PERSONAL PROTECTION
==============================================================================
Respiratory Protection: NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation: MECHANICAL EXHAUST REQUIRED.
Protective Gloves: RUBBER GLOVES.
Eye Protection: CHEMICAL SAFETY GOGGLES.
Other Equipment: SAFETY SHOWER & EYE BATH.
Work Hygenic Practices: SAFETY SHOWER & EYE BATH.
Supplemental Safety & Health: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
PHYSICAL AND CHEMICAL PROPERTIES
==============================================================================
HCC: T6
Boiling Point:
523F,273C
Melting/Freezing Point:
>271F,>133C
Decomposition Temp:
N/K
Vapor Pressure: 1 @ 163C Vapor Density: N/K
Specific Gravity: N/K
PH: N/K
Viscosity: N/P
Evaporation Rate & Reference: N/K
Solubility in Water: N/K
Appearance and Odor: WHITE POWDER.
Percent Volatiles by Volume: N/K
Corrosion Rate: N/K
==============================================================================
STABILITY AND REACTIVITY
==============================================================================
Stability Indicator: YES
Stability Conditions to Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials to Avoid: BASES, OXIDIZING AGENTS, REDUCING AGENTS.
Hazardous Decomposition Products: TOXIC FUMES OF: CARBON MONOXIDE, CARBON
DIOXIDE.
Hazardous Polymerization Products: NO
Conditions to Avoid Polymerization: NOT RELEVANT
==============================================================================
TOXICOLOGICAL
==============================================================================
N/P
==============================================================================
ECOLOGICAL
==============================================================================
N/P
==============================================================================
DISPOSAL
==============================================================================
DISSOLVE OR MIX MATERIAL W/COMBUSTIBLE SOLVENT & BURN IN A CHEMICAL
INCINERATOR EQUIPPED W/AFTERBURNER & SCRUBBER. OBSERVE ALL FEDERAL, STATE
& LOCAL ENVIRONMENTAL REGULATIONS.
==============================================================================
TRANSPORTATION
==============================================================================
N/P
==============================================================================
REGULATORY
==============================================================================
SARA Title III: N/P
Federal Regulatory: N
==============================================================================
OTHER
==============================================================================
|
|
|
Mfgs. & Exporters: Laboratory Reagents, Fine Chemicals,
Analytical Reagents & Dehydrated Culture Media |
|
|
|
|
