|
CAS
# RHODAMINE B AR |
|||
|
Blulux Laboratories Pvt. Ltd |
|
|
|
HAZARD
IDENTIFICATION
==============================================================================
Route Of Entry Inds - Inhalation: YES Skin: YES Ingestion: YES
Carcinogenicity Inds - NTP: NO IARC: NO OSHA: NO
Health Hazards Acute And Chronic: ACUTE: HARMFUL IF SWALLOWED, INHALED OR
ABSORBED THROUGH SKIN. MAY CAUSE EYE IRRITATION. MAY CAUSE SKIN IRRITATION.
CHRONIC: CARCINOGEN.
Explanation of Carcinogenicity: NOT RELEVANT
Signs and Symptoms of Overexposure: SEE HEALTH HAZARDS.
Medical Conditions Aggravated by Overexposure: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
FIRST AID
==============================================================================
EYE: SHLD BE TREATED BY IMMED & PRLNGD IRRIGATION W/COPIOUS AMTS OF WATER
FOR AT LEAST 15 MINUTES. SKIN: IMMED WASH WITH SOAP AND COPIOUS AMOUNTS OF
WATER. INHAL: REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL
RESPIRATION, PREFERABL Y MOUTH-TO-MOUTH. IF BRTHG IS DIFFICULT, GIVE OXYGEN.
INGEST: CALL MD IMMED (FP N). DISCARD CONTAMD CLTHG AND SHOES. IN CASE OF
EXPOS, GET MED ATTN IMMED.
==============================================================================
FIRE FIGHTING MEASURES
==============================================================================
Flash Point Text: N/K
Auto Ignition Temperature Text:
Lower Limits: N/K Upper Limits: N/K
Extinguishing Media: WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL POWDER, ALCOHOL
OR POLYMER FOAM.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N). PREVENT CONTACT WITH SKIN AND EYES.
Unusal Fire/Explosion Hazard: EMITS TOXIC FUMES UNDER FIRE CONDITIONS.
==============================================================================
RELEASE MEASURES
==============================================================================
Spill Release Procedures: EVACUATE AREA. WEAR NIOSH/MSHA APPRVD SCBA, RUB BOOTS
& HEAVY RUB GLOVES. WEAR DISPOSABLE COVERALLS & DISCARD THEM AFTER USE.
SWEEP UP, PLACE IN BAG & HOLD FOR WASTE DISP. AVOID RAISING DUST. VENT AREA
& WASH SPILL SITE AFTER MATL PICKUP IS COMPLETE.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISSOLVE OR MIX THE MATERIAL WITH A COMBUSTIBLE SOLVENT
AND BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN AFTERBURNER AND SCRUBBER.
OBSERVE ALL FEDERAL, STATE AND LOCAL LAWS.
==============================================================================
HANDLING AND STORAGE
==============================================================================
STORE IN A COOL DRY PLACE. KEEP TIGHTY CLOSED.
==============================================================================
EXPOSURE CONTROLS/PERSONAL PROTECTION
==============================================================================
Respiratory Protection: WEAR APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation: USE ONLY IN A CHEMICAL FUME HOOD.
Protective Gloves: CHEMICAL RESISTANT GLOVES.
Eye Protection: CHEMICAL WORKERS GOGGLES (FP N).
Other Equipment: WEAR PROTECTIVE CLOTHING. SAFETY SHOWER AND EYE BATH.
Work Hygenic Practices: WEAR PROTECTIVE CLOTHING. SAFETY SHOWER AND EYE BATH.
Supplemental Safety & Health: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
PHYSICAL AND CHEMICAL PROPERTIES
==============================================================================
HCC: N1
Boiling Point:
N/K
Melting/Freezing Point:
>410F,>210C
Decomposition Temp:
N/K
Vapor Pressure: N/K Vapor Density: N/K
Specific Gravity: N/K
PH: N/K
Viscosity: N/P
Evaporation Rate & Reference: N/K
Solubility in Water: N/K
Appearance and Odor: NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume: N/K
Corrosion Rate: N/K
==============================================================================
STABILITY AND REACTIVITY
==============================================================================
Stability Indicator: YES
Stability Conditions to Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials to Avoid: STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: THERMAL DECOMP MAY PRODUCE CARBON MONOXIDE,
CARBON DIOXIDE, AND NITROGEN OXIDES, HYDROGEN CHLORIDE GAS.
Hazardous Polymerization Products: NO
Conditions to Avoid Polymerization: NOT RELEVANT
==============================================================================
TOXICOLOGICAL
==============================================================================
N/P
==============================================================================
ECOLOGICAL
==============================================================================
N/P
==============================================================================
DISPOSAL
==============================================================================
DISSOLVE OR MIX THE MATERIAL WITH A COMBUSTIBLE SOLVENT AND BURN IN A CHEMICAL
INCINERATOR EQUIPPED WITH AN AFTERBURNER AND SCRUBBER. OBSERVE ALL FEDERAL,
STATE AND LOCAL LAWS.
==============================================================================
TRANSPORTATION
==============================================================================
N/P
==============================================================================
REGULATORY
==============================================================================
SARA Title III: N/P
Federal Regulatory: N/P
==============================================================================
OTHER
==============================================================================
|
|
|
Mfgs. & Exporters: Laboratory Reagents, Fine Chemicals,
Analytical Reagents & Dehydrated Culture Media |
|
|
|
|
