|
ˇ 1 Identification
of substance:
- Product
details:
- Product
name: Potassium Pyroantimonate
|
|
ˇ 2 Composition/Data
on components:
- Chemical
characterization:
Description:
(CAS#)
Potassium Pyroantimonate (CAS# 12208-13-8): 100%
- Identification
number(s):
- EINECS
Number: 235-387-7
- EU
Number: 051-003-00-9
|
|
ˇ 3 Hazards
identification
- Hazard
description:
Xn Harmful
N Dangerous for the environment
- Information
pertaining to particular dangers for man and environment
R 20/22 Harmful by inhalation and if swallowed.
R 51/53 Toxic to aquatic organisms, may cause long-term adverse effects
in the aquatic environment
- Classification
system
- HMIS
ratings (scale 0-4)
(Hazardous Materials Identification System)
Health (acute effects) = 2
Flammability = 0
Reactivity = 0
|
|
ˇ 4 First
aid measures
- After
inhalation
Supply fresh air. If required, provide artificial respiration. Keep
patient warm.
Seek immediate medical advice.
- After
skin contact
Immediately wash with water and soap and rinse thoroughly.
Seek immediate medical advice.
- After
eye contact
Rinse opened eye for several minutes under running water. Then consult a
doctor.
- After
swallowing Seek immediate medical advice.
|
|
ˇ 5 Fire
fighting measures
- Suitable
extinguishing agents
Product is not flammable. Use fire fighting measures that suit the
surrounding fire.
- Special
hazards caused by the material, its products of combustion or
resulting gases:
In case of fire, the following can be released:
Toxic metal oxide fume
- Protective
equipment:
Wear self-contained respirator.
Wear fully protective impervious suit.
|
|
ˇ 6 Accidental
release measures
- Person-related
safety precautions:
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
- Measures
for environmental protection:
Do not allow material to be released to the environment without proper
governmental permits.
- Measures
for cleaning/collecting:
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
- Additional
information:
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
|
|
ˇ 7 Handling
and storage
- Handling
- Information
for safe handling:
Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
Ensure good ventilation at the workplace.
Prevent formation of dust.
- Information
about protection against explosions and fires:
The product is not flammable
- Storage
- Requirements
to be met by storerooms and receptacles:
No special requirements.
- Information
about storage in one common storage facility:
Do not store together with acids.
- Further
information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well sealed containers.
|
|
ˇ 8 Exposure
controls and personal protection
- Additional
information about design of technical systems:
Properly operating chemical fume hood designed for hazardous chemicals
and having an average face velocity of at least 100 feet per minute.
Components with limit values that require monitoring at the workplace:
Antimony and antimony compounds
mg/m3
ACGIH TLV
0.5
Austria MAK 0.5
Belgium TWA 0.5
Denmark TWA 0.5
Finland TWA 0.5
France VME
0.5
Germany MAK 0.5
(total dust)
Hungary TWA
0.5-STEL
Japan OEL
0.1;
2B Carcinogen
Korea TLV
0.5
Netherlands MAC-TGG 0.5
Norway TWA
0.5
Poland TWA
0.5;
1.5-STEL
Russia TWA
0.2;
0.5-STEL
Sweden NGV
0.5
Switzerland MAK-W 0.5
United Nations TWA 0.5
USA PEL
0.5
- Additional
information: No data
- Personal
protective equipment
- General
protective and hygienic measures
The usual precautionary measures for handling chemicals should be
followed.
Keep away from foodstuffs, beverages and feed.
Remove all soiled and contaminated clothing immediately.
Wash hands before breaks and at the end of work.
- Breathing
equipment:
Use suitable respirator when high concentrations are present.
- Protection
of hands: Impervious gloves
- Eye
protection: Safety glasses
- Body
protection: Protective work clothing.
|
|
ˇ 9 Physical
and chemical properties:
- General
Information
- Form:
Powder
- Color:
White
- Odor:
Not determined
-
Value/Range Unit Method
- Change
in condition
- Melting
point/Melting range:
Not determined
- Boiling
point/Boiling range:
Not determined
- Sublimation
temperature / start: Not determined
- Flash
point:
Not applicable
- Ignition
temperature:
Not determined
- Decomposition
temperature:
Not determined
- Danger
of explosion: Product does not present an explosion hazard.
- Explosion
limits:
- Lower:
Not determined
- Upper:
Not determined
- Vapor
pressure:
Not determined
- Density:
Not determined
- Solubility
in / Miscibility with
- Water:
Slightly soluble
|
|
ˇ 10 Stability
and reactivity
- Thermal
decomposition / conditions to be avoided:
Decomposition will not occur if used and stored according to
specifications.
- Materials
to be avoided: Acids
- Dangerous
reactions No dangerous reactions known
- Dangerous
products of decomposition: Toxic metal oxide fume
|
|
ˇ 11 Toxicological
information
- Acute
toxicity:
- Primary
irritant effect:
- on
the skin: Irritant to skin and mucous membranes.
- on
the eye: Irritating effect.
- Sensitization: No
sensitizing effects known.
- Subacute
to chronic toxicity:
Antimony compounds may cause metallic taste, gastrointestinal
disturbances, vomiting, diarrhea, dizziness and systemic poisoning.
Chronic exposure may cause liver and kidney damage. Dermatitis and
eczematous skin eruptions may result from skin contact.
- Additional
toxicological information:
To the best of our knowledge the acute and chronic toxicity of this
substance is not fully known.
No classification data on carcinogenic properties of this material is
available from the EPA, IARC, NTP, OSHA or ACGIH.
|
|
ˇ 12 Ecological
information:
- Ecotoxical
effects:
- Remark:
Toxic for fish
- General
notes:
Also poisonous for fish and plankton in water bodies.
Do not allow material to be released to the environment without proper
governmental permits.
Toxic for aquatic organisms
|
|
ˇ 13 Disposal
considerations
- Product:
- Recommendation
Consult state, local or national regulations to ensure proper disposal.
- Un
cleaned packaging:
- Recommendation:
Disposal must be made according to official regulations.
|
|
ˇ 14 Transport
information
- DOT
regulations:
- Hazard
class:
6.1
- Identification
number: UN1549
- Packing
group:
III
- Proper
shipping name (technical name):
Antimony
compound, inorganic, solid, n.o.s.
(potassium
antimonate)
- Land
transport ADR/RID (cross-border)
- ADR/RID
class:
6.1 Toxic substances
- Item:
59c
- Danger
code (Kemler): 60
- UN-Number:
1549
- Description
of goods: Antimony compound,
inorganic, solid, n.o.s.
(potassium
antimonate)
- Maritime
transport IMDG:
- IMDG
Class:
6.1
- UN
Number:
1549
- Packaging
group:
III
- Proper
shipping name: Antimony compound,
inorganic, solid, n.o.s.
(potassium
antimonate)
- Air
transport ICAO-TI and IATA-DGR:
- ICAO/IATA
Class:
6.1
- UN/ID
Number:
1549
- Packaging
group:
III
- Proper
shipping name: Antimony compound, inorganic,
solid, n.o.s.
(potassium
antimonate)
|
|
ˇ 15 Regulations
- Product
related hazard information's:
- Hazard
symbols:
Xn Harmful N Dangerous for the environment
- Risk
phrases:
20/22 Harmful by inhalation and if swallowed.
51/53 Toxic to aquatic organisms, may cause long-term adverse effects in
the aquatic environment
- Safety
phrases:
61 Avoid release to the environment. Refer to special
instructions/Safety data sheets
- National
regulations
This product is not listed in the U.S. Environmental Protection Agency
Toxic Substances Control Act Chemical Substance Inventory. Use of
this product is restricted to research and development only.
Some or all of the components of this product are not listed on the Canadian
Domestic Substances List (DSL) or the Canadian Non-Domestic Substances
List (NDSL).
- Information
about limitation of use:
For use only by technically qualified individuals.
This product contains antimony and is subject to the reporting requirements
of section 313 of the Emergency Planning and Community Right to know Act
of 1986 and 40CFR372.
|
|
ˇ 16 Other
information:
Prepared by: BLULUX LABORATORIES (P) LTD.
For questions contact: Blulux Laboratories
Pvt. Ltd.
79/66-B,
I.H.I.Complex, Industrial Area, N.I.T. Faridabad, Haryana-121001
The statements contained herein are offered for
informational purposes only and are based upon technical data that Blulux
Laboratories Pvt. Ltd. believes to be accurate. It is intended for use only
by persons having the necessary technical skills and at their own discretion
and risk. Since conditions and manner of use are outside our control, we make
NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS OR OTHERWISE.
|
|
|
|
Mfgs. & Exporters: Laboratory Reagents, Fine Chemicals, Analytical
Reagents & Dehydrated Culture Media
|
|
|
|

|