|
CAS
# 7789-60-8 PHOSPHORUS TRIBROMIDE |
|||
|
Blulux Laboratories Pvt. Ltd |
|
|
|
HAZARD
IDENTIFICATION
==============================================================================
Route Of Entry Inds - Inhalation: YES Skin: NO Ingestion: NO
Carcinogenicity Inds - NTP: NO IARC: NO OSHA: NO
Health Hazards Acute And Chronic: ACUTE:HARMFUL IF INGESTED OR INHALED.
MATERIAL IS EXTREMELY DESTRUCTIVE TO TISSUE OF MUCOUS MEMBRANES & UPPER
RESP TRACT, EYES & SKIN. INHAL MAY BE FATAL AS RESULT OF SPASM, INFLAMM
& EDEMA OF LARYNX & BRONCHI, CHEM PNEUMONITIS & PULMONARY EDEMA.
Explanation of Carcinogenicity: NOT RELEVANT
Signs and Symptoms of Overexposure: BURNING SENSATION, COUGHING, WHEEZING,
LARYNGITIS, SHORTNESS OF BREATH, HEADACHE, NAUSEA AND VOMITING.
Medical Conditions Aggravated by Overexposure: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
FIRST AID
==============================================================================
EYES:IMMEDIATELY FLUSH W/COPIUS AMTS OF WATER FOR AT LEAST 15 MINUTES. ASSURE
ADEQ FLUSHING BY SEPARATING LIDS W/FINGERS. SKIN:IMMEDIATELY FLUSH W/COPIOUS
AMTS OF WATER FOR 15 MINUTES WHILE REMOVING CONTAMINATED CLTHG/SHOES. WASH
CONTAM CLT HG BEFORE REUSE. DISCARD CONTAM SHOES. INHAL:REMOVE TO FRESH AIR.
SUPPORT BRTHG (GIVE O*2/ARTF RESP), CALL MD. INGEST:CALL MD IMMEDIATELY (FP N).
==============================================================================
FIRE FIGHTING MEASURES
==============================================================================
Flash Point Text: NONE
Auto Ignition Temperature Text:
Lower Limits: N/A Upper Limits: N/A
Extinguishing Media: DRY CHEMICAL POWDER. DO NOT USE WATER.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT TO PREVENT CONTACT WITH SKIN AND EYES.
Unusal Fire/Explosion Hazard: EMITS TOXIC FUMES UNDER FIRE CONDITIONS. REACTS
W/WATER TO LIBERATE FLAMMABLE AND/OR EXPLOSIVE GAS.
==============================================================================
RELEASE MEASURES
==============================================================================
Spill Release Procedures: EVACUATE AREA. WEAR NIOSH/MSHA APPROVED SCBA, RUBBER
BOOTS & HEAVY RUBBER GLOVES. ABSORB ON SAND OR VERMICULITE & PLACE IN
CLOSED CONTAINERS FOR DISPOSAL. VENTILATE AREA & WASH SPILL SITE AFTER
MATERIAL PICKUP IS COMPLETE.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: PLEASE CONTACT TECHNICAL SERVICES DEPARTMENT. BE SURE
TO MENTION NAME, CATALOG NUMBER AND QUANTITY OF MATERIAL. DISPOSE OF I/A/W
FEDERAL, STATE AND LOCAL REGULATIONS.
==============================================================================
HANDLING AND STORAGE
==============================================================================
STORE IN COOL, DRY PLACE. HANDLE AND STORE UNDER NITROGEN. DO NOT ALLOW CONTACT
W/WATER. KEEP TIGHTLY CLOSED. AVOID PRLNGD/RPTD EXPOSURE.
==============================================================================
EXPOSURE CONTROLS/PERSONAL PROTECTION
==============================================================================
Respiratory Protection: WEAR APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation: USE ONLY IN CHEMICAL FUME HOOD.
Protective Gloves: CHEMICAL RESISTANT GLOVES.
Eye Protection: CHEMICAL WORKERS GOGGLES (FP N).
Other Equipment: PROTECTIVE CLOTHING. SAFETY SHOWER AND EYE BATH.
Work Hygenic Practices: PROTECTIVE CLOTHING. SAFETY SHOWER AND EYE BATH.
Supplemental Safety & Health: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
PHYSICAL AND CHEMICAL PROPERTIES
==============================================================================
HCC: C1
Boiling Point:
347F,175C
Melting/Freezing Point:
-40F,-40C
Decomposition Temp:
N/K
Vapor Pressure: 10.0 @ 48C Vapor Density: N/K
Specific Gravity: 2.88
PH: N/K
Viscosity: N/P
Evaporation Rate & Reference: N/K
Solubility in Water: N/K
Appearance and Odor: CLEAR, COLORLESS LIQUID.
Percent Volatiles by Volume: N/K
Corrosion Rate: N/K
==============================================================================
STABILITY AND REACTIVITY
==============================================================================
Stability Indicator: YES
Stability Conditions to Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials to Avoid: STRONG BASES, STRONG OXIDIZING AGENTS, ACIDS, ALCOHOLS.
REACTS VIOLENTLY WITH:WATER, SODIUM, POTASSIUM.
Hazardous Decomposition Products: HYDROGEN BROMIDE GAS. THERMAL DECOMPOSITION
MAY PRODUCE TOXIC FUMES OF PHOSPHORUS OXIDES AND/OR PHOSPHINE.
Hazardous Polymerization Products: NO
Conditions to Avoid Polymerization: NOT RELEVANT
==============================================================================
TOXICOLOGICAL
==============================================================================
N/P
==============================================================================
ECOLOGICAL
==============================================================================
N/P
==============================================================================
DISPOSAL
==============================================================================
PLEASE CONTACT TECHNICAL SERVICES DEPARTMENT. BE SURE TO MENTION NAME, CATALOG
NUMBER AND QUANTITY OF MATERIAL. DISPOSE OF I/A/W FEDERAL, STATE AND LOCAL
REGULATIONS.
==============================================================================
TRANSPORTATION
==============================================================================
N/P
==============================================================================
REGULATORY
==============================================================================
SARA Title III: N/P
Federal Regulatory: N/P
==============================================================================
OTHER
==============================================================================
|
|
|
Mfgs. & Exporters: Laboratory Reagents, Fine Chemicals, Analytical
Reagents & Dehydrated Culture Media |
|
|
|
|
