|
CAS
# 57 - 09 - 0 N - CETYL - N,N,N, TRIMETHYL AMMONIUM BROMIDE |
|||
|
Blulux Laboratories Pvt. Ltd |
|
|
|
1.
Product Identification
Synonyms: Cetrimonium
Bromide; Cetyltrimethylammonium bromide; Cetab; Centimide,
HEXADECYLTRIMETHYLAMMONIUM BROMIDE
CAS No.: 57-09-0
Molecular Weight: 364.45
Chemical Formula: CH3(CH2)15N(CH3)3Br
2.
Composition/Information on Ingredients
Ingredient CAS No Percent Hazardous --------------------------------------- ------------ ------------ --------- Hexadecyltrimethylammonium Bromide 57-09-0 100% Yes
3. Hazards
Identification
Emergency
Overview
--------------------------
WARNING! HARMFUL IF SWALLOWED, INHALED OR ABSORBED THROUGH SKIN. CAUSES
SEVERE IRRITATION TO EYES, SKIN AND RESPIRATORY TRACT.
Potential Health Effects
----------------------------------
Information on the human health effects from exposure to this substance is
limited.
Inhalation:
Causes irritation to the respiratory tract. Symptoms may include coughing,
shortness of breath.
Ingestion:
Toxic. Harmful if swallowed. Causes irritation to the gastrointestinal tract.
Symptoms may include nausea, vomiting and diarrhea.
Skin Contact:
Causes irritation to skin. Symptoms include redness, itching, and pain. May be
absorbed through the skin with possible systemic effects.
Eye Contact:
Causes irritation, redness, and pain.
Chronic Exposure:
No information found.
Aggravation of Pre-existing Conditions:
No information found.
4. First
Aid Measures
Inhalation:
Remove to fresh air. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Get medical attention.
Ingestion:
Induce vomiting immediately as directed by medical personnel. Never give
anything by mouth to an unconscious person. Get medical attention.
Skin Contact:
Immediately flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical attention. Wash clothing
before reuse. Thoroughly clean shoes before reuse.
Eye Contact:
Immediately flush eyes with plenty of water for at least 15 minutes, lifting
upper and lower eyelids occasionally. Get medical attention.
5. Fire
Fighting Measures
Fire:
Flash point: 244C (471F) CC
Flammable limits in air % by volume:
lel: 0.4
Not considered to be a fire hazard. Gives off highly toxic and irritating
fumes.
Explosion:
Not considered to be an explosion hazard.
Fire Extinguishing Media:
Use any means suitable for extinguishing surrounding fire.
Special Information:
In the event of a fire, wear full protective clothing and NIOSH-approved
self-contained breathing apparatus with full facepiece operated in the pressure
demand or other positive pressure mode.
6.
Accidental Release Measures
Ventilate
area of leak or spill. Wear appropriate personal protective equipment as
specified in Section 8. Spills: Sweep up and containerize for reclamation or
disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal.
7.
Handling and Storage
Keep in a
tightly closed container, stored in a cool, dry, ventilated area. Protect
against physical damage. Isolate from incompatible substances. Containers of
this material may be hazardous when empty since they retain product residues
(dust, solids); observe all warnings and precautions listed for the product.
8.
Exposure Controls/Personal Protection
Airborne
Exposure Limits:
None established.
Ventilation System:
A system of local and/or general exhaust is recommended to keep employee
exposures as low as possible. Local exhaust ventilation is generally preferred
because it can control the emissions of the contaminant at its source,
preventing dispersion of it into the general work area. Please refer to the
ACGIH document, Industrial Ventilation, A Manual of Recommended Practices,
most recent edition, for details.
Personal Respirators (NIOSH Approved):
For conditions of use where exposure to dust or mist is apparent and
engineering controls are not feasible, a particulate respirator (NIOSH type N95
or better filters) may be worn. If oil particles (e.g. lubricants, cutting
fluids, glycerine, etc.) are present, use a NIOSH type R or P filter. For
emergencies or instances where the exposure levels are not known, use a
full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying
respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection:
Wear impervious protective clothing, including boots, gloves, lab coat, apron
or coveralls, as appropriate, to prevent skin contact.
Eye Protection:
Use chemical safety goggles and/or full face shield where dusting or splashing
of solutions is possible. Maintain eye wash fountain and quick-drench
facilities in work area.
9.
Physical and Chemical Properties
Appearance:
White powder.
Odor:
No information found.
Solubility:
Soluble in water.
Specific Gravity:
No information found.
pH:
No information found.
% Volatiles by volume @ 21C (70F):
0
Boiling Point:
235C (455F)
Melting Point:
237 - 243C (459 - 469F)
Vapor Density (Air=1):
13
Vapor Pressure (mm Hg):
No information found.
Evaporation Rate (BuAc=1):
No information found.
10.
Stability and Reactivity
Stability:
Stable under ordinary conditions of use and storage. Hygroscopic powder.
Hazardous Decomposition Products:
Nitrogen oxides, oxides of carbon as well as ionic or oxidized halogen.
Hazardous Polymerization:
Will not occur.
Incompatibilities:
Strong oxidizing agents.
Conditions to Avoid:
Incompatibles.
11.
Toxicological Information
Oral rat LD50: 410 mg/Kg
Irritant, standard Draize, eye rabbit: 450 mg = severe
Investigated as a reproductive effector.
--------\Cancer Lists\------------------------------------------------------ ---NTP Carcinogen--- Ingredient Known Anticipated IARC Category ------------------------------------ ----- ----------- ------------- Hexadecyltrimethylammonium Bromide No No None (57-09-0)
12.
Ecological Information
Environmental
Fate:
No information found.
Environmental Toxicity:
No information found.
13. Disposal
Considerations
Whatever
cannot be saved for recovery or recycling should be managed in an appropriate
and approved waste disposal facility. Processing, use or contamination of this
product may change the waste management options. State and local disposal
regulations may differ from federal disposal regulations. Dispose of container
and unused contents in accordance with federal, state and local requirements.
14.
Transport Information
Not
regulated.
15.
Regulatory Information
--------\Chemical Inventory Status - Part 1\--------------------------------- Ingredient TSCA EC Japan Australia ----------------------------------------------- ---- --- ----- --------- Hexadecyltrimethylammonium Bromide (57-09-0) Yes Yes Yes Yes --------\Chemical Inventory Status - Part 2\--------------------------------- --Canada-- Ingredient Korea DSL NDSL Phil. ----------------------------------------------- ----- --- ---- ----- Hexadecyltrimethylammonium Bromide (57-09-0) Yes Yes No Yes --------\Federal, State & International Regulations - Part 1\---------------- -SARA 302- ------SARA 313------ Ingredient RQ TPQ List Chemical Catg. ----------------------------------------- --- ----- ---- -------------- Hexadecyltrimethylammonium Bromide No No No No (57-09-0) --------\Federal, State & International Regulations - Part 2\---------------- -RCRA- -TSCA- Ingredient CERCLA 261.33 8(d) ----------------------------------------- ------ ------ ------ Hexadecyltrimethylammonium Bromide No No No (57-09-0) Chemical Weapons Convention: No TSCA 12(b): No CDTA: NoSARA 311/312: Acute: Yes Chronic: No Fire: No Pressure: NoReactivity: No (Pure / Solid)
Australian
Hazchem Code: None allocated.
Poison Schedule: None allocated.
WHMIS:
This MSDS has been prepared according to the hazard criteria of the Controlled
Products Regulations (CPR) and the MSDS contains all of the information
required by the CPR.
16. Other
Information
NFPA
Ratings: Health: 2 Flammability: 0 Reactivity: 0
Label Hazard Warning:
WARNING! HARMFUL IF SWALLOWED, INHALED OR ABSORBED THROUGH SKIN. CAUSES SEVERE
IRRITATION TO EYES, SKIN AND RESPIRATORY TRACT.
Label Precautions:
Avoid breathing dust.
Avoid contact with eyes, skin and clothing.
Wash thoroughly after handling.
Keep container closed.
Use only with adequate ventilation.
Label First Aid:
In case of contact, immediately flush eyes or skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes. Wash clothing
before reuse. If inhaled, remove to fresh air. If not breathing, give
artificial respiration. If breathing is difficult, give oxygen. If swallowed,
induce vomiting immediately as directed by medical personnel. Never give
anything by mouth to an unconscious person. In all cases, get medical
attention.
Product Use:
Laboratory Reagent.
Prepared
by: BLULUX LABORATORIES (P) LTD.
For questions contact: Blulux Laboratories
Pvt. Ltd.
79/66-B,
I.H.I.Complex, Industrial Area, N.I.T. Faridabad, Haryana-121001
TEL:
:++91-129-5021360, 2444433, 2237762
FAX:++ 91129-5027762 E-MAIL: blulux@rediffmail.com
The
statements contained herein are offered for informational purposes only and are
based upon technical data that Blulux Laboratories Pvt. Ltd. believes to
be accurate. It is intended for use only by persons having the necessary
technical skills and at their own discretion and risk. Since conditions and
manner of use are outside our control, we make NO WARRANTY, EXPRESS OR IMPLIED,
OF MERCHANTABILITY, FITNESS OR OTHERWISE.
|
|
|
Mfgs. & Exporters: Laboratory Reagents, Fine Chemicals,
Analytical Reagents & Dehydrated Culture Media |
|
|
|
|
