|
CAS # 544-63-8 MYRISTIC ACID |
|||
|
Blulux Laboratories Pvt. Ltd |
|
|
|
HAZARD IDENTIFICATION
==============================================================================
Route Of Entry Inds - Inhalation: YES Skin: YES Ingestion: YES
Carcinogenicity Inds - NTP: NO IARC: NO OSHA: NO
Health Hazards Acute And Chronic: ACUTE:MAY BE HARMFUL BY INHALATION, INGESTION
OR SKIN ABSORPTION. CAUSES EYE AND SKIN IRRITATION. MATERIAL IS IRRITATING TO
MUCOUS MEMBRANES AND UPPER RESPIRATORY TRACT.
Explanation of Carcinogenicity: NONE SPECIFIED BY MANUFACTURER.
Signs and Symptoms of Overexposure: NONE SPECIFIED BY MANUFACTURER.
Medical Conditions Aggravated by Overexposure: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
FIRST AID
==============================================================================
EYES:IMMEDIATE/PRLNGD IRRIGATION W/COPIOUS AMTS OF WATER FOR AT LEAST 15
MINUTES. SKIN:IMMEDIATELY WASH W/SOAP & COPIOUS AMTS OF WATER. WASH
CONTAMINATED CLOTHING BEFORE REUSE. INHAL:REMOVE TO FRESH AIR. SUPPORT
BREATHING (GIVE O*2/ARTF RES P), CALL MD. INGEST:WASH OUT MOUTH W/WATER
PROVIDED PERSON IS CONSCIOUS. CALL MD.
==============================================================================
FIRE FIGHTING MEASURES
==============================================================================
Flash Point Text: >230F,>110C
Auto Ignition Temperature Text:
Lower Limits: N/K Upper Limits: N/K
Extinguishing Media: CARBON DIOXIDE, DRY CHEMICAL POWDER, ALCOHOL OR POLYMER
FOAM, WATER SPRAY.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT TO PREVENT CONTACT WITH SKIN AND EYES.
Unusal Fire/Explosion Hazard: THIS MATERIAL, LIKE MOST MATERIALS IN POWDER FORM
IS CAPABLE OF CREATING A DUST EXPLOSION.
==============================================================================
RELEASE MEASURES
==============================================================================
Spill Release Procedures: WEAR RESPIRATOR, CHEMICAL SAFETY GOGGLES, RUBBER
BOOTS & HEAVY RUBBER GLOVES. SWEEP UP, PLACE IN BAG & HOLD FOR WASTE
DISPOSAL. AVOID RAISING DUST. VENTILATE AREA & WASH SPILL SITE AFTER
MATERIAL PICKUP IS COMPLETE.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISSOLVE OR MIX MATERIAL W/COMBUSTIBLE SOLVENT AND BURN
IN CHEMICAL INCINERATOR EQUIPPED W/AFTERBURNER AND SCRUBBER. OBSERVE ALL
FEDERAL, STATE AND LOCAL LAWS.
==============================================================================
HANDLING AND STORAGE
==============================================================================
STORE IN COOL, DRY PLACE. KEEP CONTAINER CLOSED. AVOID PRLNGD/RPTD EXPOSURE.
AVOID CONTACT & INHALATION.
==============================================================================
EXPOSURE CONTROLS/PERSONAL PROTECTION
==============================================================================
Respiratory Protection: NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation: MECHANICAL EXHAUST REQUIRED.
Protective Gloves: RUBBER GLOVES.
Eye Protection: CHEMICAL WORKERS GOGGLES (FP N).
Other Equipment: SAFETY SHOWER AND EYE BATH.
Work Hygenic Practices: SAFETY SHOWER AND EYE BATH.
Supplemental Safety & Health: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
PHYSICAL AND CHEMICAL PROPERTIES
==============================================================================
HCC: N1
Boiling Point:
482F,250C
Melting/Freezing Point:
131F,55C
Decomposition Temp:
N/K
Vapor Pressure: N/K Vapor Density: N/K
Specific Gravity: N/K
PH: N/K
Viscosity: N/P
Evaporation Rate & Reference: N/K
Solubility in Water: N/K
Appearance and Odor: WHITE SOLID.
Percent Volatiles by Volume: N/K
Corrosion Rate: N/K
==============================================================================
STABILITY AND REACTIVITY
==============================================================================
Stability Indicator: N/P
Stability Conditions to Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials to Avoid: BASES, OXIDIZING AGENTS, REDUCING AGENTS.
Hazardous Decomposition Products: TOXIC FUMES OF:CO, CO*2.
Hazardous Polymerization Products: N/P
Conditions to Avoid Polymerization: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
TOXICOLOGICAL
==============================================================================
N/P
==============================================================================
ECOLOGICAL
==============================================================================
N/P
==============================================================================
DISPOSAL
==============================================================================
DISSOLVE OR MIX MATERIAL W/COMBUSTIBLE SOLVENT AND BURN IN CHEMICAL INCINERATOR
EQUIPPED W/AFTERBURNER AND SCRUBBER. OBSERVE ALL FEDERAL, STATE AND LOCAL LAWS.
==============================================================================
TRANSPORTATION
==============================================================================
N/P
==============================================================================
REGULATORY
==============================================================================
SARA Title III: N/P
Federal Regulatory: N/P
==============================================================================
OTHER
==============================================================================
|
|
|
Mfgs. & Exporters: Laboratory Reagents, Fine Chemicals,
Analytical Reagents & Dehydrated Culture Media |
|
|
|
|
