>
SECTION 1
- PRODUCT IDENTIFICATION AND HAZARDOUS COMPONENTS PRODUCT:
Hydrocortisone Acetate SYNONYMS:
Cortisol Acetate MOLECULAR
FORMULA: C23H32O6 MOLECULAR
WEIGHT: 404.51 CHEMICAL
FAMILY: Steroid INGREDIENT
(CAS #) % OSHA PEL ACGIH TLV Hydrocortisone
Acetate (50-03-3) 100 N/A N/A SECTION
2 - PHYSICAL AND CHEMICAL CHARACTERISTICS BOILING
POINT: N/A VAPOR PRESSURE: N/A MELTING
POINT: N/A VAPOR DENSITY: N/A SPECIFIC
GRAVITY: N/A EVAPORATION RATE: N/A (WATER
= 1) (BUTYL ACETATE = 1) WATER
SOLUBILITY: 1 mg/100 ml WATER REACTIVE: No APPEARANCE
AND ODOR: White to practically white powder. Odorless. SECTION
3 - FIRE AND EXPLOSION DATA FLASH
POINT (METHOD): N/A AUTO IGNITION TEMPERATURE: N/A FLAMMABLE
LIMITS: LOWER: N/A UPPER: N/A EXTINGUISHING
MEDIA: Water spray, carbon dioxide, dry chemical, foam. SPECIAL
FIRE FIGHTING PROCEDURES: Fire fighters should wear full protective gear
including self-contained breathing
apparatus. UNUSUAL
FIRE AND EXPLOSION HAZARDS: May produce toxic fumes if heated to decomposition. SECTION
4 - REACTIVITY HAZARD DATA STABILITY:
Stable ( X ) Unstable ( ) INCOMPATIBILITY
(MATERIALS TO AVOID): None. HAZARDOUS
DECOMPOSITION PRODUCTS: May produce toxic fumes if heated to decomposition. HAZARDOUS
POLYMERIZATION: May Occur ( ) Will Not Occur ( X ) SECTION
5 - HEALTH HAZARD DATA TOXICITY:
LD50: (intraperitoneal - rat) 2300 mg/kg (subcutaneous
- mouse) 45.05 mg/kg CARCINOGEN
LISTED BY: NTP Yes ( ) No ( X ) IARC
Yes ( ) No ( X ) OSHA
Yes ( ) No ( X ) Other
Yes ( ) No ( X ) ROUTES
OF ENTRY: Inhalation, ingestion, absorption, contact. SIGNS
AND SYMPTOMS OF OVEREXPOSURE: INHALATION:
May cause irritation of respiratory tract or allergic reaction. EYE
CONTACT: May cause irritation or allergic reaction. SKIN
CONTACT: May cause irritation or allergic reaction. INGESTION:
May cause irritation of gastrointestinal tract or allergic reaction. MSDS
- Hydrocortisone Acetate Page 2 of 4 CHRONIC
EFFECTS OF OVEREXPOSURE: Possible hyper sensitization. MEDICAL
CONDITIONS AGGRAVATED BY OVEREXPOSURE: Hypersensitivity to this material.
Systemic fungal
infection. OTHER
PRECAUTIONS TO CONSIDER: Persons developing serious hypersensitivity
(anaphylactic) reactions must receive
medical attention immediately. Exposure may cause suppression of adrenal gland
secretion, Cushing's syndrome,
water retention, electrolyte imbalance, hyperglycemia. EMERGENCY
FIRST AID PROCEDURES: INHALATION:
Remove to fresh air. If not breathing, give artificial respiration. Seek
medical attention. EYE
CONTACT: Flush with water for at least 15 minutes. If irritation persists or
develops, seek medical attention. SKIN
CONTACT: Wash with soap and water. If irritation persists or develops, seek
medical attention. INGESTION:
Flush mouth with water and seek medical attention. SECTION
6 - CONTROL AND PROTECTIVE MEASURES RESPIRATORY
PROTECTION: NIOSH-approved respirator. PROTECTIVE
GLOVES: Rubber. EYE
PROTECTION: Safety glasses or goggles. Avoid wearing contact lenses when
working with this material due to the
possibility of increased severity of eye damage. VENTILATION:
Use local ventilation if airborne levels are high. OTHER
PROTECTIVE EQUIPMENT: Appropriate laboratory apparel. HYGIENIC
WORK PRACTICES: Do not eat, drink or smoke near this material. Wash any
contaminated clothing before
reuse. SECTION
7 - HANDLING AND STORAGE PRECAUTIONS HANDLING
PRECAUTIONS: Avoid contact with skin, eyes or clothing. Avoid breathing dust. STORAGE
PRECAUTIONS: Store in tight containers in a cool, dry place. OTHER
PRECAUTIONS: Wash any exposed skin areas after handling. Wash any contaminated
clothing before reuse. SECTION
8 - SPILL AND DISPOSAL PROCEDURES STEPS
TO BE TAKEN IN CASE OF SPILL OR DISCHARGE: Wear all protective clothing
including respirator, gloves
and safety glasses/goggles. Vacuum or sweep up spillage and place in a tight
container. Wash spill area with soap
and water. Wash any exposed skin area and wash contaminated clothing before
reuse. WASTE
DISPOSAL METHOD: Dispose of in accordance with all applicable local, state,
federal, and environmental regulations. SECTION
9 - DISCLAIMER The
statements contained herein are offered for informational purposes only and are
based upon technical data that Blulux Laboratories Pvt. Ltd. believes to
be accurate. It is intended for use only by persons having the necessary
technical skills and at their own discretion and risk. Since conditions and
manner of use are outside our control, we make NO WARRANTY, EXPRESS OR IMPLIED,
OF MERCHANTABILITY, FITNESS OR OTHERWISE _________________________________________________________________________________________ DEFINITIONS
OF ABBREVIATIONS USED: ACGIH:
American Conference of Governmental Industrial Hygienists CAS:
Chemical Abstract Service IARC:
Internal Agency for Research on Cancer IDLH:
Immediately Dangerous to Life or Health level LC50:
Median Lethal Concentration LD50:
Median Lethal Dose N/A:
Not available NTP:
National Toxicology Program OSHA:
Occupational Safety and Health Administration PEL:
Permissible Exposure Limit STEL:
Short Term Exposure Limit TLV:
Threshold Limit Value
79/66-B, I.H.I.Complex, Industrial Area, N.I.T. Faridabad,
Haryana-121001 TEL:
:++91-129-5021360, 2444433, 2237762
FAX:++ 91129-5027762 E-MAIL: blulux@rediffmail.com The statements contained herein
are offered for informational purposes only and are based upon technical data
that Blulux Laboratories Pvt. Ltd. believes to be accurate. It is intended for
use only by persons having the necessary technical skills and at their own
discretion and risk. Since conditions and manner of use are outside our
control, we make NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS
OR OTHERWISE.
|
|||||||||||