|
CAS # EPICHLOROHYDRIN |
|||
|
Blulux Laboratories Pvt. Ltd |
|
|
|
HAZARD
IDENTIFICATION
==============================================================================
Route Of Entry Inds - Inhalation: YES Skin: YES Ingestion: NO
Carcinogenicity Inds - NTP: YES IARC: YES OSHA: NO
Health Hazards Acute And Chronic: INHALATION: IRRITATION TO NOSE, THROAT,
LUNGS. MAY AFFECT LUNGS, LIVER, & KIDNEYS. SKIN: IRRITATION &/OR
CHEMICAL BURNS. MAY CAUSE ALLERGIC REACTIONS. MAY BE ABSORBED THROUGH THE
SKIN/EFFECTS OTHER ORGANS. EYES: POSSIBLY PERMANENT DAMAGE TO
EYES/IRRITATION/MAY CAUSE CLOUDING OF CORNEA/TISSUE & DEATH.
Explanation of Carcinogenicity: SEE INGREDIENTS
Signs and Symptoms of Overexposure: INHALATION: IRRITATION TO NOSE, THROAT,
LUNGS. SKIN: IRRITATION, CHEMICAL BURNS. EYES: IRRITATION.
Medical Conditions Aggravated by Overexposure: N/K
==============================================================================
FIRST AID
==============================================================================
INHALATION: REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED ADMINISTER ARTIFICIAL
RESPIRATION. IF BREATHING IS DIFFICULT ADMINISTER OXYGEN. SKIN: WASH W/PLENTY
OF WATER & SOAP FOR 15 MIN. REMOVE CONTAMINATED CLOTHING. EYES: FLUSH
W/PLENTY OF WATER FOR 15 MINS. INGESTION: INDUCE VOMITING. OBTAIN MEDICAL
ATTENTION IN ALL CASES.
==============================================================================
FIRE FIGHTING MEASURES
==============================================================================
Flash Point Text: 69.8C
Auto Ignition Temperature Text:
Lower Limits: N/K Upper Limits: N/K
Extinguishing Media: ALCOHOL OR POLYMER FOAM, CO2.
Fire Fighting Procedures: EVACUATE AREA. WEAR SELF-CONTAINED BREATHING
APPARATUS & FULL PROTECTIVE CLOTHING. USE WATER SPRAY TO COOL FIRE EXPOSED
CONTAINERS.
Unusal Fire/Explosion Hazard: VAPORS MAY TRAVEL TO IGNITION SOURCE CREATING A
FLASHBACK, FORMS EXPLOSIVE MIXTURES IN AIR, EMITS TOXIC FUMES, MAY UNDERGO
AUTOPOLYMERIZATION W/HEAT.0
==============================================================================
RELEASE MEASURES
==============================================================================
Spill Release Procedures: EVACUATE AREA. WEAR SELF CONTAINED BREATHING
APPARATUS. SHUT OFF ALL POSSIBLE IGNITION SOURCES. SOAK UP ON INERT ABSORBENT,
PLACE IN IMPERVIOUS CONTAINER SEAL/LABEL FOR DISPOSAL. VENTILATE AREA. WASH
AREA W/WATER SPRAY AFTER ABSORBENT PICK UP.
Neutralizing Agent: N/K
Waste Disposal Methods: DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, & FEDERAL
REGULATIONS.
==============================================================================
HANDLING AND STORAGE
==============================================================================
KEEP TIGHTLY SEALED IN COOL, WELL VENTILATED AREA, AWAY FROM IGNITION SOURCES.
PREVENT ALL CONTACT W/SKIN & EYES, CLOTHING. KEEP AWAY FROM HEAT.
==============================================================================
EXPOSURE CONTROLS/PERSONAL PROTECTION
==============================================================================
Respiratory Protection: OSHA/MSHA APPROVED RESPIRATOR WITH 8 INCH FACE SHIELD.
Ventilation: HIGH EFFICIENCY FUME HOOD REQUIRED.
Protective Gloves: IMPERVIOUS DISPOSABLE POLYETHYLENE
Eye Protection: SPLASH PROOF GOGGLES/FACE SHIELD.
Other Equipment: IMPERMEABLE LABORATORY CLOTHING, EYE BATH, SAFETY SHOWER.
Work Hygenic Practices: IMPERMEABLE LABORATORY CLOTHING, EYE BATH, SAFETY
SHOWER.
Supplemental Safety & Health: N/K
==============================================================================
PHYSICAL AND CHEMICAL PROPERTIES
==============================================================================
Boiling Point:
115-117C
Melting/Freezing Point:
-57C
Decomposition Temp:
N/K
Vapor Pressure: 12.5 Vapor Density: 3.29
Specific Gravity: 1.18
PH: N/K
Viscosity: N/P
Evaporation Rate & Reference: N/R
Solubility in Water: SLIGHT
Appearance and Odor: COLORLESS, MOBILE LIQUID, IRRITATING CHLOROFORM-LIKE ODOR.
Percent Volatiles by Volume: N/K
Corrosion Rate: N/K
==============================================================================
STABILITY AND REACTIVITY
==============================================================================
Stability Indicator: NO
Stability Conditions to Avoid: EXCESSIVE HEAT, CONTAMINATION BY INCOMPATIBLE
SUBSTANCES & SOURCES OF IGNITION.
Materials to Avoid: ACIDS, BASES, AMMONIA, AMINES, SODIUM, ZINC, MAGNESIUM,
ALUMINUM & THEIR ALLOYS; HALIDES.
Hazardous Decomposition Products: TOXIC FUMES, HYDROGEN CHLORIDE, PHOSGENE.
Hazardous Polymerization Products: YES
Conditions to Avoid Polymerization: EXCESSIVE HEAT, CONTAMINATION BY INCOMPATIBLE
SUBSTANCES & OTHER SOURCES OF IGNITION
==============================================================================
TOXICOLOGICAL
==============================================================================
N/P
==============================================================================
ECOLOGICAL
==============================================================================
N/P
==============================================================================
DISPOSAL
==============================================================================
DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, & FEDERAL REGULATIONS.
==============================================================================
TRANSPORTATION
==============================================================================
N/P
==============================================================================
REGULATORY
==============================================================================
SARA Title III: N/P
Federal Regulatory: N/P
==============================================================================
OTHER
==============================================================================
|
|
|
Mfgs. & Exporters: Laboratory Reagents, Fine Chemicals,
Analytical Reagents & Dehydrated Culture Media |
|
|
|
|
