|
CAS
# 617-45-8 DL-ASPARTIC ACID PURE |
|||
|
Blulux Laboratories Pvt. Ltd |
|
|
|
HAZARD
IDENTIFICATION
==============================================================================
Route Of Entry Inds - Inhalation: YES Skin: YES Ingestion: YES
Carcinogenicity Inds - NTP: NO IARC: NO OSHA: NO
Health Hazards Acute And Chronic: ACUTE: MAY BE HARMFUL BY INHALATION,
INGESTION, OR SKIN ABSORPTION. MAY CAUSE EYE/SKIN IRRITATION. TO THE BEST OF
MFR KNOWLEDGE, THE CHEMICAL, PHYSICAL, AND TOXICOLOGICAL PROPERTIES HAVE NOT
BEEN THOROUGHLY INVESTIGATED.
Explanation of Carcinogenicity: NOT RELEVANT
Signs and Symptoms of Overexposure: SEE HELATH HAZARDS.
Medical Conditions Aggravated by Overexposure: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
FIRST AID
==============================================================================
EYES: IMMED FLUSH WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. SKIN:
IMMED WASH WITH SOAP AND COPIOUS AMOUNTS OF WATER. WASH CONTAMINATED CLOTHING
BEFORE REUSE. INHAL:REMOVE TO FRESH AIR. IF NOT BREATHING GIVE ARTIFICIAL
RESPIRATI ON. IF BREATHING IS DIFFICULT, GIVE OXYGEN. INGEST: WASH OUT MOUTH
W/WATER PROVIDED PERSON IS CONSCIOUS. CALL A PHYSICIAN.
==============================================================================
FIRE FIGHTING MEASURES
==============================================================================
Flash Point Text: N/K
Auto Ignition Temperature Text:
Lower Limits: N/K Upper Limits: N/K
Extinguishing Media: WATER SPRAY. CARBON DIOXIDE, DRY CHEMICAL POWDER OR
APPROPRIATE FOAM.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N).
Unusal Fire/Explosion Hazard: EMITS TOXIC FUMES UNDER FIRE CONDITIONS.
==============================================================================
RELEASE MEASURES
==============================================================================
Spill Release Procedures: CHEMICAL SAFETY GOGGLES. USE PROTECTIVE CLOTHING,
GLOVES AND NIOSH/MSHA APPROVED MASK. SWEEP UP, PLACE IN A BAG AND HOLD FOR
WASTE DISPOSAL. AVOID RAISING DUST. VENTILATE AREA AND WASH SPILL SITE AFTER
MATERIAL PICKUP IS COMPLETE.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISSOLVE/MIX MATERIAL WITH A COMBUSTIBLE SOLVENT AND
BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN AFTERBURNER AND SCRUBBER.
DISPOSE I/A/W LOCAL, STATE AND FEDERAL REGULATIONS (FP N).
==============================================================================
HANDLING AND STORAGE
==============================================================================
AVOID INHALATION. AVOID CONTACT W/EYES/SKIN/CLTHG. AVOID PRLNGD/RPTD EXPOSURE.
KEEP TIGHTLY CLOSED. STORE IN A COOL DRY PLACE.
==============================================================================
EXPOSURE CONTROLS/PERSONAL PROTECTION
==============================================================================
Respiratory Protection: NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation: MECHANICAL EXHAUST REQUIRED.
Protective Gloves: COMPATIBLE CHEMICAL-RESISTANT.
Eye Protection: CHEMICAL WORKERS GOGGLES (FP N).
Other Equipment: SAFETY SHOWER AND EYE BATH.
Work Hygenic Practices: SAFETY SHOWER AND EYE BATH.
Supplemental Safety & Health: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
PHYSICAL AND CHEMICAL PROPERTIES
==============================================================================
Boiling Point:
N/K
Melting/Freezing Point:
>300F,>149C
Decomposition Temp:
N/K
Vapor Pressure: N/K Vapor Density: N/K
Specific Gravity: N/K
PH: N/K
Viscosity: N/P
Evaporation Rate & Reference: N/K
Solubility in Water: N/K
Appearance and Odor: WHITE POWDER
Percent Volatiles by Volume: N/K
Corrosion Rate: N/K
==============================================================================
STABILITY AND REACTIVITY
==============================================================================
Stability Indicator: YES
Stability Conditions to Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials to Avoid: STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: TOXIC FUMES OF: CARBON MONOXIDE, CARBON
DIOXIDE, NITROGEN OXIDES.
Hazardous Polymerization Products: NO
Conditions to Avoid Polymerization: NOT RELEVANT
==============================================================================
TOXICOLOGICAL
==============================================================================
N/P
==============================================================================
ECOLOGICAL
==============================================================================
N/P
==============================================================================
DISPOSAL
==============================================================================
DISSOLVE/MIX MATERIAL WITH A COMBUSTIBLE SOLVENT AND BURN IN A CHEMICAL
INCINERATOR EQUIPPED WITH AN AFTERBURNER AND SCRUBBER. DISPOSE I/A/W LOCAL,
STATE AND FEDERAL REGULATIONS (FP N).
==============================================================================
TRANSPORTATION
==============================================================================
N/P
==============================================================================
REGULATORY
==============================================================================
SARA Title III: N/P
Federal Regulatory: N/P
==============================================================================
OTHER
==============================================================================
|
|
|
Mfgs. & Exporters: Laboratory Reagents, Fine Chemicals,
Analytical Reagents & Dehydrated Culture Media |
|
|
|
|
