|
CAS # 7787-56-6 BERYLLIUM SULFATE, TETRAHYDRATE (LAB) |
|||
|
Blulux Laboratories Pvt. Ltd |
|
|
|
HAZARD
IDENTIFICATION
==============================================================================
Route Of Entry Inds - Inhalation: YES Skin: YES Ingestion: YES
Carcinogenicity Inds - NTP: YES IARC: YES OSHA: NO
Health Hazards Acute And Chronic: ACUTE: MAY BE FATAL IF INHALED, SWALLOWED OR
ABSORBED THROUGH SKIN. CAUSE EYE AND SKIN IRRITATION. MATERIAL IS IRRITATING TO
MUCOUS MEMBRANES AND UPPER RESPIRATORY TRACT. CHRONIC: CARCINOGEN.
Explanation of Carcinogenicity: NTP FIFTH ANNUAL REPORT ON CARCINOGENS, 1989,
LIST 2; IARC LIST 2A.
Signs and Symptoms of Overexposure: NONE SPECIFIED BY MANUFACTURER.
Medical Conditions Aggravated by Overexposure: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
FIRST AID
==============================================================================
IMMED FLUSH EYES OR SKIN WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15 MIN
WHILE REMOVING CONTAMINATED CLOTHING AND SHOES. IRRITANT. CALL A PHYSICIAN.
WASH CONTAMINATED CLOTHING BEFORE REUSE. INHAL: REMOVE TO FRESH AIR. SUPPORT
BREATHING (G IVE O*2/ARTF RESP) (FP N). INGEST: CALL MD IMMED (FP N).
==============================================================================
FIRE FIGHTING MEASURES
==============================================================================
Flash Point Text: N/K
Auto Ignition Temperature Text:
Lower Limits: N/K Upper Limits: N/K
Extinguishing Media: NONCOMBUSTIBLE.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N) TO PREVENT CONTACT WITH SKIN AND EYES.
Unusal Fire/Explosion Hazard: EMITS TOXIC FUMES UNDER FIRE CONDITIONS.
==============================================================================
RELEASE MEASURES
==============================================================================
Spill Release Procedures: EVACUATE AREA. WEAR NIOSH/MSHA APPRVD SCBA, RUB
BOOTS/HEAVY RUB GLOVES. WEAR DISPOSABLE COVERALLS & DISCARD THEM AFTER USE.
SWEEP UP/PLACE IN BAG & HOLD FOR WASTE DISP. AVOID RAISING DUST. VENTILATE
AREA/WASH SPILL SITE AFTER MATL PICKUP IS COMPLETE.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: BURY IN A LANDFILL SITE APPROVED FOR THE DISPOSAL OF
CHEMICAL AND HAZARDOUS WASTES. OBSERVE ALL FEDERAL, STATE AND LOCAL LAWS.
==============================================================================
HANDLING AND STORAGE
==============================================================================
DO NOT BREATHE DUST. AVOID ALL CONTACT. HARMFUL SOLID. KEEP TIGHTLY CLOSED.
STORE IN A COOL DRY PLACE. HIGHLY TOXIC.
==============================================================================
EXPOSURE CONTROLS/PERSONAL PROTECTION
==============================================================================
Respiratory Protection: WEAR APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation: NONE SPECIFIED BY MANUFACTURER.
Protective Gloves: CHEMICAL-RESISTANT GLOVES.
Eye Protection: CHEMICAL WORKERS GOGGLES (FP N).
Other Equipment: PROTECTIVE CLOTHING. SAFETY SHOWER/EYE BATH.
Work Hygenic Practices: PROTECTIVE CLOTHING. SAFETY SHOWER/EYE BATH.
Supplemental Safety & Health: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
PHYSICAL AND CHEMICAL PROPERTIES
==============================================================================
HCC: T3
Boiling Point:
N/K
Melting/Freezing Point:
N/K
Decomposition Temp:
N/K
Vapor Pressure: N/K Vapor Density: N/K
Specific Gravity: 1.713
PH: N/K
Viscosity: N/P
Evaporation Rate & Reference: N/K
Solubility in Water: N/K
Appearance and Odor: NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume: N/K
Corrosion Rate: N/K
==============================================================================
STABILITY AND REACTIVITY
==============================================================================
Stability Indicator: N/P
Stability Conditions to Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials to Avoid: STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: SULFUR OXIDES.
Hazardous Polymerization Products: N/P
Conditions to Avoid Polymerization: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
TOXICOLOGICAL
==============================================================================
N/P
==============================================================================
ECOLOGICAL
==============================================================================
N/P
==============================================================================
DISPOSAL
==============================================================================
BURY IN A LANDFILL SITE APPROVED FOR THE DISPOSAL OF CHEMICAL AND HAZARDOUS
WASTES. OBSERVE ALL FEDERAL, STATE AND LOCAL LAWS.
==============================================================================
TRANSPORTATION
==============================================================================
N/P
==============================================================================
REGULATORY
==============================================================================
SARA Title III: N/P
Federal Regulatory: N/P
==============================================================================
OTHER
==============================================================================
|
|
|
Mfgs. & Exporters: Laboratory Reagents, Fine Chemicals,
Analytical Reagents & Dehydrated Culture Media |
|
|
|
|
