|
CAS# 9000-01-5 GUM ARABIC (ACACIA)
LR |
|||
|
Blulux
Laboratories Pvt. Ltd |
|
|
|
HAZARD
IDENTIFICATION
==============================================================================
Route Of Entry Inds - Inhalation: YES Skin: YES Ingestion: YES
Carcinogenicity Inds - NTP: NO IARC: NO OSHA: NO
Health Hazards Acute And Chronic: MAY BE HARMFUL BY INHAL,INGEST,SKIN
ABSORPTION.CAUSES EYE/SKIN IRRIT.MATL IS IRRIT TO MUCOUS MEMBRANES & UPPER
RESP TRACT. PROLONGED/REPEATED EXPO MAY CAUSE ALLERGIC REACTIONS IN CERTAIN
SENSITIVE INDIVIDUALS. TO THE BEST OF COMPANY'S KNWOL EDGE
CHEM/PHYS/TOXICOLOGICAL PROPERTIES HAVE NOT BEEN THOROUGLY INVESTIGATED.
Explanation of Carcinogenicity: PER MSDS:NO EVIDENCE (NTP).
Signs and Symptoms of Overexposure: HARMFUL BY INHAL, INGEST, SKIN ABSORPTION.
EYE/SKIN IRRITATION. MUCOUS MEMBRANES & UPPER RESPIRATORY TRACT IRRITATION.
ALLERGIC REACTIONS IN SENSITIVE INDIVIDUALS.
Medical Conditions Aggravated by Overexposure: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
FIRST AID
==============================================================================
IN CASE OF CONTACT IMMED FLUSH EYES W/COPIOUS AMTS OF WATER FOR @LEAST 15MINS.
INHAL:REMOVE TO FRESH AIR. IF NOT BREATHING GIVE ART RESP. IF BREATHING IS
DIFFICULT GIVE OXYGEN. INGEST:WASH OUT MOUTH W/WATER PROVIDED PERSON IS
CONSCIOUS. CAL L PHYSICIAN.
==============================================================================
FIRE FIGHTING MEASURES
==============================================================================
Flash Point
Text:
N/K
Auto Ignition Temperature Text:
Lower
Limits:
N/K
Upper
Limits:
N/K
Extinguishing Media: WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL POWDER OR APPROPRIATE
FOAM.
Fire Fighting Procedures: WEAR SELF-CONTAINED BREATHING APPARATUS &
PROTECTIVE CLOTHING TO PREVENT CONTACT W/SKIN & EYES.
Unusal Fire/Explosion Hazard: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
RELEASE MEASURES
==============================================================================
Spill Release Procedures: WEAR SELF-CONTAINED BREATHING APPARATUS, RUBBER BOOTS
& HEAVY RUBBER GLOVES. SWEEP UP. PLACE IN BAG & HOLD FOR WASTE
DISPOSAL. AVOID RAISING DUST. VENTILATE AREA & WASH SPILL SITE AFT MATL
PICKUP IS COMPLETE.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISSOLVE OR MIX MATL W/COMBUSTIBLE SOLVENT & BURN
IN CHEM INCINERATOR EQUIPPED W/AFTERBURNER & SCRUBBER. OBSERVE ALL LOCAL,
STATE AND FEDERAL ENVIRONMENTAL REGULATIONS.
==============================================================================
HANDLING AND STORAGE
==============================================================================
DO NOT BREATHE DUST. DO NOT GET IN EYES/SKIN/CLOTHING. AVOID PROLONGED/REPEATED
EXPOSURE. KEEP TIGHTLY CLOSED. STORE IN COOL DRY PLACE.
==============================================================================
EXPOSURE CONTROLS/PERSONAL PROTECTION
==============================================================================
Respiratory
Protection:
NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:
MECHANICAL EXHAUST REQUIRED.
Protective
Gloves:
RUBBER GLOVES.
Eye
Protection:
CHEMICAL SAFETY GOGGLES.
Other
Equipment:
SAFETY SHOWER & EYE BATH.
Work Hygenic
Practices:
SAFETY SHOWER & EYE BATH.
Supplemental Safety &
Health:
N/P
==============================================================================
PHYSICAL AND CHEMICAL PROPERTIES
==============================================================================
HCC:
N1
Boiling
Point:
N/K
Melting/Freezing
Point:
N/K
Decomposition
Temp:
N/K
Vapor
Pressure:
N/K
Vapor
Density:
N/K
Specific
Gravity:
N/K
PH:
N/K
Viscosity:
N/K
Evaporation Rate &
Reference:
N/K
Solubility in Water:
N/K
Appearance and
Odor:
OFF-WHITE POWDER.
Percent Volatiles by
Volume:
N/K
Corrosion
Rate:
N/K
==============================================================================
STABILITY AND REACTIVITY
==============================================================================
Stability
Indicator:
N/P
Stability Conditions to
Avoid:
NONE SPECIFIED BY MANUFACTURER.
Materials to
Avoid:
STRONG OXIDIZING AGENTS.
Hazardous Decomposition
Products:
CARBON MONOXIDE AND CARBON DIOXIDE
Hazardous Polymerization
Products:
N/P
Conditions to Avoid
Polymerization:
NONE SPECIFIED BY MANUFACTURER.
==============================================================================
TOXICOLOGICAL
==============================================================================
N/P
==============================================================================
ECOLOGICAL
==============================================================================
N/P
==============================================================================
DISPOSAL
==============================================================================
DISSOLVE OR MIX MATL W/COMBUSTIBLE SOLVENT & BURN IN CHEM INCINERATOR
EQUIPPED W/AFTERBURNER & SCRUBBER. OBSERVE ALL LOCAL, STATE AND FEDERAL
ENVIRONMENTAL REGULATIONS.
==============================================================================
TRANSPORTATION
==============================================================================
N/P
==============================================================================
REGULATORY
==============================================================================
SARA Title
III:
N/P
Federal
Regulatory:
N/P
==============================================================================
OTHER
==============================================================================
|
|
|
Mfgs. & Exporters: Laboratory Reagents, Fine Chemicals,
Analytical Reagents & Dehydrated Culture Media |
|
|
|
|
