CAS #
79-06-1 ACRYLAMIDE for SYNTHESIS
|
|||
|
Blulux Laboratories Pvt. Ltd |
|
|
|
HAZARD
IDENTIFICATION
==============================================================================
Route Of Entry Inds - Inhalation: N/P Skin: N/P Ingestion: N/P
Carcinogenicity Inds - NTP: N/P IARC: N/P OSHA: N/P
Health Hazards Acute And
Chronic:
N/P
Explanation of Carcinogenicity:
N/P
Signs and Symptoms of Overexposure: INH:DROWSINESS,FATIGUE,TINGLG;ING:MAY CAUSE
POISONG;SKIN/EYES:MAY CAUSE IRRIT,REDNESS & PAIN.
Medical Conditions Aggravated by Overexposure: N/P
==============================================================================
FIRST AID
==============================================================================
INHAL:REMOVE TO FRESH AIR.GIVE CPR/OXYGEN IF NEEDED;INGEST:IF SWALLOWED,GIVE
TWO GLASSES OF WATER & INDUCE VOMIT.NOTHING BY MOUTH IF UNCON;SKIN/EYE
EXPOSURE:RMV CONTMNTD CLOTHG.WASH SKIN W/SOAP & H*2O.FLUSH SKIN/EYES W/LG
H*2O;GET MED HELP IMMEDIATLY
==============================================================================
FIRE FIGHTING MEASURES
==============================================================================
Flash Point
Text:
NON-FLAMMABLE
Auto Ignition Temperature Text:
Lower
Limits:
N/R
Upper
Limits:
N/R
Extinguishing Media: DRY CHEM,FOAM,CO*2;WATER SPRAY:TO KEEP EXPSD CANS COOL
Fire Fighting Procedures: USE H*20 TO COOL EXPD CONTRS. USE SCBA & FULL
PROT.CLTHG.
Unusal Fire/Explosion Hazard: NOT CONSIDERED AN EXPLOSU HAZ,BUT AN EXPLOSION
MAY OCCUR UPON POLYMERIZATION
==============================================================================
RELEASE MEASURES
==============================================================================
Spill Release Procedures: RMV IGN SOURCES.VENT AREA.USE RESP PROTCTION &
PROTCTV CLOTHG.KEEP OUT OF SURF H*2O,SEWRS/CONFND AREAS;PICK UP SM SPILLS &
PLACE IN A SUITABLE CONTNR FOR RECLAMATION OR DISPOSAL.LG SPILL:DIKE
AREA.CONTAIN&RECOVER SPILL IF POSS;SHOVL RESDUE INTO DRUMS
Neutralizing
Agent:
N/P
Waste Disposal Methods: WHATEVER CANNOT BE SAVED FOR RECLAMATION MAY BE
DISPOSED IN RCRA APPROVED HAZARDOUS WASTE FACILITY.ENSURE COMPLIANCE
W/LOCAL,STATE & FEDERAL REGULATIONS; CWA/CERCLA REPORTABLE QTY (RQ): 5000
LBS.
==============================================================================
HANDLING AND STORAGE
==============================================================================
KEEP IN TIGHTLY CLOSED CONTAINERS,STORED IN COOL,DRY,VENTILATED AREA.PROTECT
AGAINST PHYSICAL DAMAGE.ISOLATE FM INCOMPATIBLE MATL,HEAT & SUNLIGHT,ETC.
==============================================================================
EXPOSURE CONTROLS/PERSONAL PROTECTION
==============================================================================
Respiratory Protection: SUPPLIED AIR RESPIR/SCBA; ESCAPE: GAS MASK
Ventilation: LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves: IMPERVIOUS
Eye Protection: GOGGLES/FACE SHIELD
Other Equipment: FULL PROTECTIVE CLOTHING,SAFETY SHOWER,EYE WASH STATION
Work Hygenic Practices: FULL PROTECTIVE CLOTHING,SAFETY SHOWER,EYE WASH STATION
Supplemental Safety & Health: MSDS FM MFR DATED:8/8/85 CONFORMS TO OSHA HAZ
COMM STD; WARNING: HARMFUL IF SWALLOWED,INHALED,OR ABSORBED THRU SKIN. AFFECTS
THE CNTRAL & PERIPHERAL NERVOUS SYST; MELTING POINT:83-85C/181-185F
==============================================================================
PHYSICAL AND CHEMICAL PROPERTIES
==============================================================================
HCC:
T3
Boiling
Point:
>175C(347F)
Melting/Freezing
Point:
N/A
Decomposition
Temp:
N/A
Vapor
Pressure:
N/R
Vapor
Density:
2.4
Specific
Gravity:
1.12
PH:
N/P
Viscosity:
N/P
Evaporation Rate &
Reference:
N/R
Solubility in
Water:
COMPLETE
Appearance and Odor: COLORLESS CRYSTALS,MILD CHARACTERISTIC ODOR.
Percent Volatiles by Volume: N/R
Corrosion Rate: N/P
==============================================================================
STABILITY AND REACTIVITY
==============================================================================
Stability Indicator: NO
Stability Conditions to Avoid: AVOID EXPOSURE TO HEAT & UV LIGHT.
Materials to Avoid: ACIDS,BASES & OXIDIZING AGENTS
Hazardous Decomposition Products: GIVES CO, CO*2,NITROGEN OXIDES,& NH*3
WHEN HEATD TO DECOMPOS
Hazardous Polymerization Products: YES
Conditions to Avoid Polymerization: READILY POLYMERIZATION ON EXPOSURE TO HEAT
OR U.V.LIGHT.
==============================================================================
TOXICOLOGICAL
==============================================================================
N/P
==============================================================================
ECOLOGICAL
==============================================================================
N/P
==============================================================================
DISPOSAL
==============================================================================
WHATEVER CANNOT BE SAVED FOR RECLAMATION MAY BE DISPOSED IN RCRA APPROVED
HAZARDOUS WASTE FACILITY.ENSURE COMPLIANCE W/LOCAL,STATE & FEDERAL
REGULATIONS; CWA/CERCLA REPORTABLE QTY (RQ): 5000 LBS.
==============================================================================
TRANSPORTATION
==============================================================================
N/P
==============================================================================
REGULATORY
==============================================================================
SARA Title
III:
N/P
==============================================================================
OTHER
==============================================================================
|
|
|
Mfgs. & Exporters: Laboratory Reagents, Fine Chemicals,
Analytical Reagents & Dehydrated Culture Media |
|
|
|
|
