CAS # 83-32-9 ACENAPHTHENE LR
|
|||
|
Blulux
Laboratories Pvt. Ltd |
|
|
|
HAZARD
IDENTIFICATION
==============================================================================
Route Of Entry Inds - Inhalation: YES Skin: YES Ingestion: YES
Carcinogenicity Inds - NTP: NO IARC: NO OSHA: NO
Health Hazards Acute And Chronic: ACUTE: MAY BE HARMFUL BY INHALATION,
INGESTION OR SKIN ABSORPTION. CAUSES EYE AND SKIN IRRITATION. MATERIAL IS
IRRITATING TO MUCOUS MEMBRANES AND UPPER RESPIRATORY TRACT. TO THE BEST OF MFR
KNOWLEDGE, THE CHEMICAL, PHYSICAL, AND TOXICOLOGIC AL PROPERTIES HAVE NOT BEEN
THOROUGHLY INVESTIGATED.
Explanation of Carcinogenicity: NOT
RELEVANT
Signs and Symptoms of Overexposure: SEE HEALTH
HAZARDS.
Medical Conditions Aggravated by Overexposure: NONE
SPECIFIED BY MANUFACTURER.
==============================================================================
FIRST AID
==============================================================================
EYES: IMMED FLUSH WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15 MINUTES &
SEEK MED ADVICE. SKIN: IMMED WASH SKIN WITH SOAP AND COPIOUS AMOUNTS OF WATER.
WASH CONTAMINATED CLOTHING BEFORE REUSE. INHAL: REMOVE TO FRESH AIR. IF NOT
BREATHING G IVE ARTIFICIAL RESPIRATION. IF BREATHING IS DIFFICULT, GIVE OXYGEN.
INGEST: WASH OUT MOUTH WITH WATER PROVIDED PERSON IS CONSCIOUS. CALL A
PHYSICIAN.
==============================================================================
FIRE FIGHTING MEASURES
==============================================================================
Flash Point Text: N/K
Auto Ignition Temperature Text:
Lower Limits: N/K
Upper
Limits: N/K
Extinguishing Media: WATER SPRAY. CARBON DIOXIDE, DRY CHEMICAL POWDER OR
APPROPRIATE FOAM.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N).
Unusal Fire/Explosion Hazard: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
RELEASE MEASURES
==============================================================================
Spill Release Procedures: WEAR NIOSH/MSHA APPROVED SCBA, RUBBER BOOTS AND HEAVY
RUBBER GLOVES. SWEEP UP, PLACE IN A BAG AND HOLD FOR WASTE DISPOSAL. AVOID
RAISING DUST. VENTILATE AREA AND WASH SPILL SITE AFTER MATERIAL PICKUP IS
COMPLETE.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISSOLVE/MIX MATERIAL WITH A COMBUSTIBLE SOLVENT AND
BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN AFTERBURNER AND SCRUBBER.
DISPOSE OF I/A/W FEDERAL, STATE AND LOCAL REGULATIONS (FP N).
==============================================================================
HANDLING AND STORAGE
==============================================================================
KEEP TIGHTLY CLOSED. STORE IN A COOL DRY PLACE. AVOID CONTACT AND INHALATION.
DO NOT GET IN EYES, ON SKIN/CLTHG. IRRITANT.
==============================================================================
EXPOSURE CONTROLS/PERSONAL PROTECTION
==============================================================================
Respiratory Protection: NIOSH/MSHA
APPROVED RESPIRATOR.
Ventilation: MECHANICAL
EXHAUST REQUIRED.
Protective Gloves: RUBBER
GLOVES.
Eye Protection: CHEMICAL
SAFETY GOGGLES.
Other Equipment: SAFETY SHOWER AND EYE BATH. WEAR SUITABLE
PROTECTIVE CLOTHING.
Work Hygenic Practices: SAFETY SHOWER AND EYE BATH. WEAR SUITABLE PROTECTIVE
CLOTHING.
Supplemental Safety & Health: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
PHYSICAL AND CHEMICAL PROPERTIES
==============================================================================
Boiling Point: 534F,279C
Melting/Freezing Point: 199F,93C
Decomposition Temp: N/K
Vapor Pressure: 10@131C
Vapor
Density: 5.32
Specific Gravity: N/K
PH: N/K
Viscosity: N/P
Evaporation Rate & Reference: N/K
Solubility in Water: N/K
Appearance and Odor: PALE-YELLOW
NEEDLES.
Percent Volatiles by Volume: N/K
Corrosion Rate: N/K
==============================================================================
STABILITY AND REACTIVITY
==============================================================================
Stability Indicator: YES
Stability Conditions to Avoid: NONE
SPECIFIED BY MANUFACTURER.
Materials to Avoid: STRONG
OXIDIZING AGENTS.
Hazardous Decomposition Products: TOXIC FUMES OF: CARBON MONOXIDE, CARBON
DIOXIDE.
Hazardous Polymerization Products: NO
Conditions to Avoid Polymerization: NOT RELEVANT
==============================================================================
TOXICOLOGICAL
==============================================================================
N/P
==============================================================================
ECOLOGICAL
==============================================================================
N/P
==============================================================================
DISPOSAL
==============================================================================
DISSOLVE/MIX MATERIAL WITH A COMBUSTIBLE SOLVENT AND BURN IN A CHEMICAL
INCINERATOR EQUIPPED WITH AN AFTERBURNER AND SCRUBBER. DISPOSE OF I/A/W
FEDERAL, STATE AND LOCAL REGULATIONS (FP N).
==============================================================================
TRANSPORTATION
==============================================================================
N/P
==============================================================================
REGULATORY
==============================================================================
SARA Title III: N/P
Federal Regulatory: N/P
==============================================================================
OTHER
==============================================================================
|
|
|
Mfgs. & Exporters: Laboratory Reagents, Fine Chemicals,
Analytical Reagents & Dehydrated Culture Media |
|
|
|
|
