|
CAS #
9000-01-5 ACACIA SPRAY DRIED POWDER LR |
|||
|
Blulux Laboratories Pvt. Ltd |
|
|
|
HAZARD
IDENTIFICATION
==============================================================================
Route Of Entry Inds - Inhalation: YES Skin: YES Ingestion: YES
Carcinogenicity Inds - NTP: NO IARC: NO OSHA: NO
Health Hazards Acute And Chronic: MAY BE HARMFUL BY INHAL,INGEST,SKIN
ABSORPTION.CAUSES EYE/SKIN IRRIT.MATL IS IRRIT TO MUCOUS MEMBRANES & UPPER
RESP TRACT. PROLONGED/REPEATED EXPO MAY CAUSE ALLERGIC REACTIONS IN CERTAIN
SENSITIVE INDIVIDUALS. TO THE BEST OF COMPANY'S KNWOL EDGE
CHEM/PHYS/TOXICOLOGICAL PROPERTIES HAVE NOT BEEN THOROUGLY INVESTIGATED.
Explanation of Carcinogenicity: PER MSDS:NO EVIDENCE (NTP).
Signs and Symptoms of Overexposure: HARMFUL BY INHAL, INGEST, SKIN ABSORPTION.
EYE/SKIN IRRITATION. MUCOUS MEMBRANES & UPPER RESPIRATORY TRACT IRRITATION.
ALLERGIC REACTIONS IN SENSITIVE INDIVIDUALS.
Medical Conditions Aggravated by Overexposure: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
FIRST AID
==============================================================================
IN CASE OF CONTACT IMMED FLUSH EYES W/COPIOUS AMTS OF WATER FOR @LEAST 15MINS.
INHAL:REMOVE TO FRESH AIR. IF NOT BREATHING GIVE ART RESP. IF BREATHING IS
DIFFICULT GIVE OXYGEN. INGEST:WASH OUT MOUTH W/WATER PROVIDED PERSON IS
CONSCIOUS. CAL L PHYSICIAN.
==============================================================================
FIRE FIGHTING MEASURES
==============================================================================
Flash Point Text: N/K
Auto Ignition Temperature Text:
Lower
Limits: N/K
Upper
Limits: N/K
Extinguishing Media: WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL POWDER OR
APPROPRIATE FOAM.
Fire Fighting Procedures: WEAR SELF-CONTAINED BREATHING APPARATUS &
PROTECTIVE CLOTHING TO PREVENT CONTACT W/SKIN & EYES.
Unusal Fire/Explosion Hazard: NONE SPECIFIED BY MANUFACTURER.
==============================================================================
RELEASE MEASURES
==============================================================================
Spill Release Procedures: WEAR SELF-CONTAINED BREATHING APPARATUS, RUBBER BOOTS
& HEAVY RUBBER GLOVES. SWEEP UP. PLACE IN BAG & HOLD FOR WASTE
DISPOSAL. AVOID RAISING DUST. VENTILATE AREA & WASH SPILL SITE AFT MATL
PICKUP IS COMPLETE.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISSOLVE OR MIX MATL W/COMBUSTIBLE SOLVENT & BURN
IN CHEM INCINERATOR EQUIPPED W/AFTERBURNER & SCRUBBER. OBSERVE ALL LOCAL,
STATE AND FEDERAL ENVIRONMENTAL REGULATIONS.
==============================================================================
HANDLING AND STORAGE
==============================================================================
DO NOT BREATHE DUST. DO NOT GET IN EYES/SKIN/CLOTHING. AVOID PROLONGED/REPEATED
EXPOSURE. KEEP TIGHTLY CLOSED. STORE IN COOL DRY PLACE.
==============================================================================
EXPOSURE CONTROLS/PERSONAL PROTECTION
==============================================================================
Respiratory Protection:
NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation: MECHANICAL
EXHAUST REQUIRED.
Protective Gloves: RUBBER
GLOVES.
Eye Protection: CHEMICAL SAFETY GOGGLES.
Other Equipment:
SAFETY SHOWER & EYE BATH.
Work Hygenic Practices: SAFETY SHOWER & EYE BATH.
Supplemental Safety & Health: N/P
==============================================================================
PHYSICAL AND CHEMICAL PROPERTIES
==============================================================================
HCC: N1
Boiling Point: N/K
Melting/Freezing Point: N/K
Decomposition Temp: N/K
Vapor Pressure: N/K
Vapor
Density: N/K
Specific Gravity: N/K
PH: N/K
Viscosity: N/K
Evaporation Rate & Reference: N/K
Solubility in Water: N/K
Appearance and Odor: OFF-WHITE
POWDER.
Percent Volatiles by Volume: N/K
Corrosion Rate: N/K
==============================================================================
STABILITY AND REACTIVITY
==============================================================================
Stability Indicator: N/P
Stability Conditions to Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials to Avoid: STRONG
OXIDIZING AGENTS.
Hazardous Decomposition Products: CARBON MONOXIDE AND CARBON DIOXIDE
Hazardous Polymerization Products: N/P
Conditions to Avoid Polymerization: NONE SPECIFIED BY
MANUFACTURER.
==============================================================================
TOXICOLOGICAL
==============================================================================
N/P
==============================================================================
ECOLOGICAL
==============================================================================
N/P
==============================================================================
DISPOSAL
==============================================================================
DISSOLVE OR MIX MATL W/COMBUSTIBLE SOLVENT & BURN IN CHEM INCINERATOR
EQUIPPED W/AFTERBURNER & SCRUBBER. OBSERVE ALL LOCAL, STATE AND FEDERAL
ENVIRONMENTAL REGULATIONS.
==============================================================================
TRANSPORTATION
==============================================================================
N/P
==============================================================================
REGULATORY
==============================================================================
SARA Title III: N/P
Federal Regulatory: N/P
==============================================================================
OTHER
==============================================================================
|
|
|
Mfgs. & Exporters: Laboratory Reagents, Fine Chemicals,
Analytical Reagents & Dehydrated Culture Media |
|
|
|
|
